mechanical dredging
mechanical dredging
dredging
Mechanical
Mechanical Dredging is just as the name implies, a giant shovel that mechanically scoops up bottom material and deposits it into barges, often called scows, to be towed away and either bottom dumped in another location or more normally, off loaded with another crane or excavator onto land for recycling or, if contaminated, trucked to a disposal facility designed to contain such contaminants or treated with polymers to encapsulate hazardous contaminants.
Mechanical Dredging usually has a much faster mobilization (setup) time then Hydraulic Dredging. One disadvantage is the spoils (bottom material) scow must be pushed with a Tug Boat or Push-Boat to another location, typically handled at least once again to get unloaded, and often a third time into trucks for road transport.
Both types are capable of excavating most all of the spoils (bottom material) when correctly sized. Machine sizes range from relatively tiny for small slips to absolutely gargantuan with enough force to fracture and remove solid rock.
dredging with...
Hydraulic Excavators:

  • Perfect for small and medium sized jobs
  • Fast bucket cycle times
  • Low height profile for smaller machines helpful for working under power lines and trees.
  • No cables to spool or snarl while using all the advantages of hydraulics, the hydraulic systems often use biodegradable hydraulic fluid to reduce possible environmental hazards.

Cable Cranes:

  • Capable of much deeper digging depths
  • Often scaled up to much larger bucket sizes, 12 yards is not uncommon
  • Much more versatile for construction lifting and salvage operation